ASTM F436/F436M-16 | Hardened Steel Washers Inch and Metric Dimensions |
ASTM F2437/F2437M | Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs |
ASME B18.1.1-1972 (R2016) | Small Solid Rivets 7/16 In. Nominal Diameter and Smaller |
ASME B18.1.2-1972 (R2016) | Large Rivets 1/2 In. Nominal Diameter and Larger |
ASME B18.7-2007 (R2017) | General Purpose Semi-Tubular Rivets, Full Tubular Rivets, Split Rivets and End Caps |
IFI-110-2003 (R2013) | Glossary of Terms Relating to Blind Rivets |
IFI-114-2015 | Break Mandrel Blind Rivets |
IFI-116-2015 | Multi-Grip Break Mandrel Blind Rivets |
IFI-117-2003 (R2013) | Pull Through Mandrel Blind Rivets |
IFI-119-2003 (R2013) | Structural Flush Break Pull Mandrel Self-Plugging Blind Rivets |
IFI-123-2003 (R2013) | Drive Pin Blind Rivets |
IFI-126-2003 (R2013) | Break Mandrel Closed End Blind Rivets |
IFI-130-2003 (R2013) | Structural Splitting Self-Plugging Pull Mandrel Blind Rivets |
IFI-134-2015 | Structural Positive Locking, Self-Plugging Blind Rivets |
IFI-135-2013 | Mechanical Testing of Blind Rivets |
IFI-137-2003 (R2013) | Inspection and Quality Assurance for General Purpose Blind Rivets |
ASME B18.8.1-2014 | Clevis Pins and Cotter Pins (Inch Series) |
ASME B18.8.2-2000 (R2010) | Taper Pins, Dowel Pins, Straight Pins, Grooved Pins,and Spring Pins (Inch Series) |
ASTM B695-04 (R2016) | Coatings of Zinc Mechanically Deposited on Iron and Steel |
ASTM F1941/F1941M-16 | Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |