Location:Home->Product and Service->Tools

Huck Pneudraulic Tooling

2025

2025

 The Model 2025 Installation Tool is shipped with a plastic plug in the air inlet connector. The connector has 1/4-18 female pipe threads to accept the air hose fitting. Quick disconnect fittings and 1/4” inside diameter air hose are recommended. An air supply of 90 - 100 psi capable of 20 CFM must be available. Air supply should be equipped with a filter-regulator-lubricator unit.


Details


246

246

The Model 246 Installation Tool is shipped with a plastic  plug in the air inlet connector. The connector has 1/4-18  female pipe threads to accept the air hose fitting. Quick  disconnect fittings and 1/4” inside diameter air hose are -  recommended. An air supply of 90 - 100 psi capable of 20  CFM must be available. Air supply should be equipped with  a filter-regulator-lubricator unit.


Details


256

256

The Model 256 Installation Tool is shipped with a plastic plug in the air inlet connector. The connector has 1/4-18 female pipe threads to accept the air hose fitting. Quick disconnect fittings and 1/4” inside diameter air hose are recommended. An air supply of 90-100 psi capable of 22.4 CFM must be available. Air supply should be equipped with a filter-regulator-lubricator unit.

Details


244BT

244BT

The Model 244BT Installation Tool is shipped with a  plastic plug in the air inlet connector. The connector  has 1/4-18 female pipe threads to accept the air hose  fitting. Quick disconnect fittings and 1/4” inside  diameter air hose (1) are recommended. An air supply  of 90-100 psi capable of 6.3 CFM must be available.  Air supply should be equipped with a filter-regulator-  lubricator unit.


Details


256BT

256BT

The 256BT Tool is designed for rapid installation of Huck BobTail fasteners.  It features optimum stroke for one-cycle installation of fasteners, and minimal moving parts.

The 256BT installs both 7.9mm and 9.5mm BobTail Fasteners

Details


* NOTE: For additional tool details, refer to the specific fastener brochure or visit AFSHuck.net.

Huck Hydraulic Tooling

2480

2480

   The Model 2480 is a very lightweight  tool which provides for the high-speed  installation of a wide range of HuckBolt  and Huck blind bolt fasteners. The tool  has only one moving part, resulting in outstanding reliability and minimal  maintenance. The tight centerline-to-  edge measurement of the Model 2480  and its light weight (2.21 pounds) allow  for its use in limited clearance areas.

Details


2581

2581

The 2581series, with appropriate nose  assemblies, install a wide range of Huck blind fasteners and  HUCKBOLT® fasteners. These lightweight and compact tools  are particularly adapted to installing fasteners in limited  clearance areas. Each tool is complete with hydraulic hoses  and couplings, electric switch and cord.

An unloading valve, designed to relieve hydraulic pressure  at end of the PULL stroke, is positioned by the piston. The  end of the piston rod is threaded. A retaining nut and stop  are included for attaching a nose assembly

Details


2600

2600

The Model 2600 is a lightweight and versatile installation tool designed to use with a wide range of Huck blind fasteners and HuckBolt® fasteners. The tool’s compact size allows it to fit into limited clearance applications, while its light weight provides for outstanding operator productivity.


Details


2620

2620

The Model 2620 is a lightweight and versatile installation tool designed to use with a wide range of Huck blind fasteners and HuckBolt fasteners. The tool’s compact size allows it to fit into limited clearance applications, while its light weight provides for outstanding operator productivity.


Details



2620-PT

2620-PT

The Model 2620-PT is a pass-through hydraulic tool. The tool is capable of installing  1/2" diameter Huck lockbolts and blind bolts. This tooling is fully compatible with existing pass-through nose assemblies.


Details


2624

2624

The 2624 is a lightweight ergonomic .for installing 5/8” and 16MM diameter Huck lockbolts and blind bolts. This line of tooling is fully compatible with existing nose assemblies


Details


3585

3585

Offering durable construction, advanced hydraulics, and safe, ergonomic design, the 3585 installation tool is easy-to-hold and efficient to use. An improved piston and cylinder design promote longer life. In addition, the nose adapter can be removed through the back of the tool for ease of repair. The 3585 is ideal for installation of all -16 (1/2”) to -24 (3/4") pintail-style lockbolts. Stroke: 1.812”; Weight: 19 lbs.


Details


2630

2630

The 2630 is a lighter weight, ergonomically designed replacement for the 506 Tool, utilising the same Nose Assemblies. The 2630 tool has only one moving part for maximum reliability and the sealing configuration is designed to minimise service requirements.

Details

507

507

The Model 507 is a heavy-duty tool sized for the installation of 1" C50L HuckBolt fasteners. This rugged tool provides high-speed installation in a wide range of production applications.


Details


6304&7304&9304

6304&7304&9304

Huck models 6304, 7304, 8304, and 9304 Hydraulic Installation Tools are used to install C50L and M50L HUCK-  BOLT® Fasteners. Each tool model has the same eccentric configuration to install fasteners in limited clearance  applications. The four tool models vary in size and pull capacity. Each model has a built-in nose assembly  designed to install a specific size fastener.

Details


BTT25

BTT25

The BTT25 was developed specifically for installation of BobTail 12mm to 14mm fasteners.  As with all BTT (BobTail Tool) Tools, the BTT25 is configured for limited clearance applications.  The unique hydraulic piston arrangement allows for a small diameter cylinder, which gives a small center-to-edge distance along the complete length of the tool.


Details


BTT35

BTT35

The BTT35 was developed specifically for installation of the BobTail 16mm fastener.  As with all BTT (BobTail Tool) Tools, the BTT35 is configured for limited clearance applications.  The unique hydraulic piston arrangement allows for a small diameter cylinder, which gives a small center-to-edge distance along the complete length of the tool.


Details


BTT57

BTT57

The BTT57 was developed specifically for installation of the BobTail 20mm fastener.  As with all BTT (BobTail Tool) Tools, the BTT57 is configured for limited clearance applications.  The unique hydraulic piston arrangement allows for a small diameter cylinder, which gives a small center-to-edge distance along the complete length of the tool.


Details


SFBTT8

SFBTT8

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.

Details


SFBTT20

SFBTT20

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.


Details


SF20

SF20

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.


Details


SF46

SF46

Huck’s proprietary, advanced swageforward tooling for BobTail fasteners, the SFBTT series, makes the installation process quicker and easier by reducing the force required to install each fastener. More compact and lighter weight than previous Huck lockbolt production tooling, BobTail installation tools also offer greater operator flexibility as well as extended reach into difficult areas.For tight, space-constrained applications, swageforward BobTail tools allow the operator to position his or her hand at a safe distance from the working structure during installation.


Details


* NOTE: For additional tool details, refer to the specific fastener brochure or visit AFSHuck.net.

AVK Pneudraulic Tooling

AR Tooling

AR Tooling

AVK HAND OPERATED PNEUMATIC TOOL

AVK has selected the ARO Brand Pneumatic Tool for its ergonomic design and outstanding dependability. The rocker style forward and reverse trigger is easy and comfortable to use.

The AVK pneumatic tool features a Quick-Change thread adaption kit. This patented* feature allows for easy access to the thread size component parts. AVK’s Pneumatic tools provide the highest RPM for the thread size selected resulting in optimum installation speed.

Details


AS Tooling

AS Tooling

AVK HAND OPERATED PNEUMATIC TOOL

AVK has selected the ARO Brand Pneumatic Tool for its ergonomic design and outstanding dependability. The rocker style forward and reverse trigger is easy and comfortable to use.

The AVK pneumatic tool features a Quick-Change thread adaption kit. This patented* feature allows for easy access to the thread size component parts. AVK’s Pneumatic tools provide the highest RPM for the thread size selected resulting in optimum installation speed.

Details


AT AW Tooling

AT AW Tooling

AVK HAND OPERATED PNEUMATIC TOOL

AVK has selected the ARO Brand Pneumatic Tool for its ergonomic design and outstanding dependability. The rocker style forward and reverse trigger is easy and comfortable to use.

The AVK pneumatic tool features a Quick-Change thread adaption kit. This patented* feature allows for easy access to the thread size component parts. AVK’s Pneumatic tools provide the highest RPM for the thread size selected resulting in optimum installation speed.

Details


AL AK AH AP AO Tooling

AL AK AH AP AO Tooling

AVK HAND OPERATED PNEUMATIC TOOL

AVK has selected the ARO Brand Pneumatic Tool for its ergonomic design and outstanding dependability. The rocker style forward and reverse trigger is easy and comfortable to use.

The AVK pneumatic tool features a Quick-Change thread adaption kit. This patented* feature allows for easy access to the thread size component parts. AVK’s Pneumatic tools provide the highest RPM for the thread size selected resulting in optimum installation speed.

Details

AVK5500

AVK5500

AVK OST™ PNEUMATIC RAPID INSERT TOOL - AVK5500

Time is money; and to reduce your installation cost with a rapid sure shot installation tool, AVK is pleased to introduce the AVK One-Set™ Tool (OST™) insert installation system. Our OST™ is a multi-stroke and pull to pressure insert tool designed to meet any installation criteria.

OST™ is s a light weight 4.4 pound ergonomic installation tool allowing you to select your Placement Method, Stroke or Pressure. Combined with our insert auto-feed threading system, and single trigger installation, this tool will offer a new standard in fast and easy insert installation for your product assembly.

Details


* NOTE: For additional tool details, refer to the specific fastener brochure or visit AFSHuck.net.

GAIPNAIL Pneudraulic Tooling

211

211

Rugged, Ergonomic and Portable

The Gripnail 211 Air Tool is used for driving fasteners that require a precise, regulated, simple impact. This trigger activated tool has a safety interlock that prevents accidental firing and impact is adjusted with the incoming air pressure. The lightweight, ergonomic design has a comfortable, cushioned handle and includes The Freedom Swivel® air coupler to help keep the air hose from interfering with the operation.


*

Power RIG1

HK32-002

HK32-002

The electrically operated HK32-002  Powerig is designed to operate Huck  hydraulic Installation Tools, (See  Utilisation).

The maximum hydraulic Pull Pressure and  Return Pressure is 580 bar (8410 psi).The Powerig hydraulic Directional Valves  plus control circuits, are powered from a  24 Volt DC remote circuit activated by the  Tool Trigger via the PLC.

Details


940-220

940-220

The Model 940-220 Powerig® is a portable unit sized for moderate production and repair applications. This unit features rugged construction for durability in the field, and the choice of 220 Volt AC power. The Model 940-220 includes a handle for easy transport, simple adjustable hydraulic outputs and quick-connect couplers for connecting installation tool hoses.

SPECIFICATIONS

Width:10.5 in.
Length:12.5
Height:18 in.
Weight:74.5 lbs. operational, 66 lbs. w/o hydraulic fluid
Power:electric,  220 volts, single phase
Flow Rate:70 cu. in./min. @ 5,000 psi
Reservoir Capacity:1.5 gallons
Options: 220V, 60/50 hertz single phase, 250VDC, direct current

Details


918

918

The Model 918 Powerig® is the largest hydraulic unit offered by Huck. Sized for high production applications, the unit can operate up to two tools independently. This electrically powered model also delivers sufficient power to operate the tools up to 100 feet away. A 22-gallon reservoir stores hydraulic fluid, with a filter-strainer in the suction line to assure clean, filtered fluid.

SPECIFICATIONS

Width: 25 in.
Length: 44 in.
Height: 30 in.
Weight:780 lbs. operational, 585 lbs. w/o hydraulic fluid
Power: electric, 220 or 440 volts 3 phase
Flow Rate : 2.0 gpm per tool station
Reservoir Capacity: 22 gallons

Details


918-5

918-5

The Model 918-5 POWERIG® is the largest hydraulic unit offered by HUCK. Sized for high production applications the unit can operate up to three tools independently. This electrically powered model also delivers sufficient power to operate the tools up to 100 feet away. A 22-gallon reservoir stores hydraulic fluid, with a filter-strainer in the suction line to assure clean, filtered fluid.

Details


*